If you have a hard drive that you would like to boot from and it is larger than 2 TB, you can select GPT (GUID), but you will also need to be running a supported operating system and the system's firmware must be UEFI, not BIOS. If you have a hard drive that you would like to use but not boot from and it is larger than 2 TB, select GPT (GUID). If you have a hard drive that you would like to use and it is 2 TB or smaller, select MBR when you initialize the hard drive for the first time. The maximum hard drive size of GPT is 9400000000 TB, with sector sizes of 512 (the standard size for most hard drives at this time). The G stands for GUID (Globally Unique Identifier), and the P and T stand for Partition Table. To remedy this, the GPT format was introduced. As such, if you have a 3 TB hard drive and you use MBR, only 2 TB of your 3 TB hard drive will be accessible. The maximum hard drive size of MBR is 2 TB. MBR stands for Master Boot Record and was the default partition table format before hard drives were larger than 2 TB. The drive should now be accessible in Finder.įor products related to this article, click here. Select the new drive and click the Partition tab.Ĭlick Options and verify that it is set to GUID Partition Table. Navigate to Applications and click Utilities. To create a partition on a new drive, complete the following: Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive. If you are prompted to initialize the drive, click Initialize. Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on). A partition defines an area of the drive to use for storing data. Mac OSīefore you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. The new drive should appear in Windows Explorer. Clear the Enable file and folder compression check box.Select the Perform a quick format check box.Set the Allocation unit size to Default.Leave the partition size set to default, and click Next.Īssign a drive letter or leave it set to the default, and click Next.Įnter the following settings to format the partition: Right-click Unallocated or RAW volume, and select New Simple Volume. To use a different file system, select a different option in step 6. Note: The following steps create an NTFS partition that uses the entire drive space. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ. If you are running Windows ® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. When prompted to, initialize your disk(s). Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device. Note: You typically only need to initialize a drive if the drive is new. The partition uses a file system (for example, ex-FAT, NTFS, and so on). Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |